How to Choose a Wireless Mic System | BOYA-MIC.COM

　　In today's era of entertainment and cultural life is extremely active, many business units and other groups will have a lot of entertainment, group activities, these activities, I believe always unwilling wireless microphone. However, the performance of wireless microphone is often affected by frequency interference, user error operation and other factors and a variety of failures.
　　Wireless microphone from the sound into electrical signals, and then become high-frequency radio waves withered launch, and then receive back demodulation, amplification, reduction into sound this entire process, there are many links. A link did not notice, maybe it can work, but its stability, the scope of work will be reduced a little, did not notice another link, it will reduce the use of narrowing the point, so cumulative, multiple links at the same time A loophole, wireless microphone is not disturbed, is "running frequency", even if the distance is not close to normal use. On the contrary, all links have noticed, wireless microphone interference ability will be greatly enhanced, the stability will be greatly improved.

　　BY-WHM8 UHF Wireless Handheld Transmitter
　　The BOYA BY-WHM8 is a Wireless handheld transmitter with a dynamic, cardioid capsule, suitable for BOYA BY-WM6 and BY-WM8 wireless receiver. The BOYA BY-WHM8 provides professional, portable wireless operation in the 24MHz band, is easy to operate and affordable. It features an easy to read LCD display, easy one-touch channel search and lightweight plastic housing.
Wireless microphone
The operator should carefully check the wireless microphone before performing or using it, connect the system correctly, and set up the antenna reasonably to ensure that the microphone is in normal working condition, so as to avoid the silence of the wireless microphone during the performance or use. The main points to note are as follows:
　　1, check the battery box is in good contact, the battery is energized.
　　2, the boot should first open the receiver, check the RF header to determine this channel without RF interference, and then open the emitter.
　　3, check the microphone mute switch to ensure that the wireless transmitter and microphone is always in working condition.
　　4, do not pile up the receiver, so as not to interfere with each other between receivers.
　　5, after the end of the power to take out, because individual microphones are tactile switch, are in standby mode, or live work, do not remove the battery power will run out.
　　Use should pay attention to the problem
　　(1) During the performance, pay attention to observe whether the RF signal of the RF signal is normal and prevent the interference of the external wireless signal.

　　(2) When handing over the microphone, avoid putting multiple multi-branch enabled wireless microphone together and not close to the receiving antenna to avoid intermodulation interference and affect the use of wireless microphone.

BOYA wireless microphone
Shotgun microphone system
Stereo microphone system
BY-M8C Lavalier Microphone
BY-M8OD Lavalier Microphone
BY-LM300 Dual-Lavalier Microphone
ENG/broadcast microphone
Smartphone microphone
Conference microphone system

评论

发表评论

此博客中的热门博文

Using a Shotgun Microphone for Video Interviewing

图片
　　Stage audio equipment in many different types of audio, microphone (or wireless microphone ) + mixer + amplifier + speakers can be. In addition to the microphone source, sometimes also need DVD, computer music, etc., can also be used computer. But if it is to be a professional stage sound effects, in addition to the professional stage staff, plus effects, timing, equalizer, voltage limiter and other audio equipment. 　　A sound mixing device with multiple channel inputs, the sound of each channel can be processed separately and with left and right channels, mix, monitor, etc. output. Is the sound engineer, sound engineer and composer for music, sound important equipment. 　　The audio voltage signal is converted to a fixed power signal used to drive the speaker sound equipment. Power amplifier matching conditions. 　　 BY-LM400 Dual-Lavalier Microphone 　　The BOYA BY-LM400 is a dual-lavalier microphone is designed for recording interviews. With 3.5mm(1/8") TRRS connector
阅读全文

What are the best budget wireless microphones for Smartphone ？

图片
　　Many people think that choosing a good quality wireless microphone can avoid all kinds of interference. In fact the anti-jamming microphone and the quality of the microphone itself is not much direct contact. Only the correct use of wireless microphone can effectively extend the life of the microphone, to avoid errors caused by: microphone whistling, interference, sound quality distortion and damage to the microphone components. 　　When using a handheld wireless microphone , the distance between the microphone and the mouth is generally maintained at 5-10cm is better, too close to have a near talk effect, too far off the sound, will undermine the sound quality; in the use of lavalier microphone, to prevent Microphone too far away from the mouth, as close as possible to the mouth; use the headband microphone is to avoid the mouth is facing the microphone head, to avoid the impact of vocal airflow should be moved to both sides. 　　With the popularization and widespread use
阅读全文

The Best Wireless Microphone and System in 2018

图片
　　The performance of Wireless Microphone is often affected by various factors such as frequency interference, user error handling, and so on. This article will teach you how to avoid and prevent the most common wireless microphone problems. 　　When using Wireless microphone , there is always interference between the system itself. Although each system has frequencies or intervals of several megahertz, Intermodulation Distortion (IMD) can still cause interference between microphones. If there is not enough space between the intermodulation signal and the device's operating frequency, it is difficult for the receiver to pick up the signal from the transmitter. Typical phenomena are crosstalk between systems, frequent signal loss or excessive noise and distortion. 　　The minimum separation between frequencies depends on the design of the system receiver, which may require an interval of 1 MHz from the nearest neighbor. The more expensive receivers usually have narrower adj
阅读全文